Skip to main content

Bourbonbarrel 5 l - 10 l

Product information "Bourbonbarrel 5 l - 10 l"

Freshly emptied Bourbon barrels for maturation of distillates. The barrels have been filled for 9 month.

Full with caramel, back aromas and powdery grain, hot and oaky, vanilla and nutty flavors. They are perfectly suitable for the maturation of Whisky, Beer- and corn brandy. But it is also allowed to experimentalize, for example with cherry spirit, plum spirit or Vodka. 

Flavor:
Full with caramel, back aromas and powdery grain, hot and oaky, vanilla and nutty flavors.

The barrels are delivered with stand and, as an option, with a little spigot. 


Barrel will be deliverd with a wooden or silicon bung.

Used wooden barrels: Notches in the wood or, in certain circumstances, an uneven base, do not constitute a quality defect, but stem from the idiosyncrasies of the production method and the prior use of the barrels. The usage of the barrel will not be affected by those! The barrels are very carefully checked by us at the exit control against sensor and technical errors. We assume no liability for cracks or splits that occur during maturation. A possible and a reasonable repair is not under guarantee. Please note, the content indicated for wooden casks do not correspond with net capacity. The capacity can be higher or even less. Balances are not reason for reclamations. 

Pictures are examples, colour variations are possible

 

volume approx

lenght cm

Ø belly cm 

Ø head cm

5 l

29

22

19

10 l

33

27

23

Characteristics from "Bourbonbarrel 5 l - 10 l"
Liter: 5 l, 10 l
Previous fill: Bourbon

Accessories for small barrels

Variants available
"wine - hener" of glass
cm: 37,5 cm
Noble sample wine hener to take wine samples from the wooden barrel. Stable version. Practical and beautiful with a curved handle, in three different lengths.

€51.17*
net: €43.00
Barrel steaming
If you wish we steam the inside of your barrel. This procedure open the pores of the wood and the barrel lose some "intensity". We recommend the steaming of small distillate barrels because the surface of the wood in relation to the stored distillate is big.

€26.18*
net: €22.00
54.67 %
Barrel storage for 100 l - Resale
Wooden barrel storage - consisting of 2 wooden hangers - used and refurbished.To store a barrel, a pair of wooden supports (made of Douglas fir) is required. These can also be placed in the spaces between the barrels to form a pyramid. The barrel supports can be used both as a base piece and as a combination piece.Made from Douglas fir wood, which is resistant to moisture in storage cellars.Dimensions in cm ca.:Width: 53 cmHeight: 12 cmDepth: 6 cmPrice per pair

€20.23* €44.63* (54.67% saved)
net: €17.00
Brass tap
As an option we offer brass taps for installation in barrels. This spigot offers you a professional tapping from the barrel.In combination with an order of an oak barrel we install this tap without additional cost. In case you want to set up the tap by yourself, a drilling of 11 to 12 mm is required. Length of tap is ca. 7 cm, length without thread is ca. 4 cm

€30.94*
net: €26.00
Copper valinch - small
Handmade valinch made of copper for taking distillate samples from the wooden barrel. Those who are dedicated to distillates and are passionate about a certain luxury will find that certain something with the copper valinch. The whisky thief is now not only an indispensable and practical accessory, but also a visual eye-catcher. For the right tasting and also presentation of distillates, the -well better- valincher is the icing on the cake.  In handling, the whisky thief does not differ in any way from its glass counterpart. We recommend the use of the distillate siphon for exclusive distillates. Dimensions ca.:Total length: 27,5 cmØ Pipe: 17 mmØ Head: 33 mm

€151.13*
net: €127.00
Glass funnel
Glass funnel Ø 100 mm

€69.97*
net: €58.80
High quality steel tap
As an option, we offer the installation of a stainless steel spigot in your barrels. This spigot allows the professional tap from the barrel, can be removed for cleaning and meets the modern food law conditions.In connection with the order of a wooden barrel, we install the spigot without extra cost. 12 cmThe classic with inner ball spigot. We recommend this high quality spigot for all barrels off approx. 5 liters content.  

€49.50*
net: €41.60
sample alcoholometer with glass spindle cylinder
Template alcoholometer 0-100 vol% - 2 pieces in a set with a glass measuring cylinder.Suitable for measuring the alcohol content of spirits or distillates (not suitable for measuring wine and sugary alcohol). Measuring the alcohol content helps to dilute home-distilled spirits or distillates to drinking strength.All parts must be washed and disinfected before use

€41.27*
net: €34.68
Variants available
Sample thief - glass mini
Set: 3 pieces in a set
These beautiful tasting lifters, mouth-blown in Germany, are not only really practical, but also a real eye-catcher at your tastings. These filigree and very handy sample lifters are ideal for presenting and tasting your wine, brandy or beer. The opening at the top of the tasting siphon closes with a small movement of the hand and thus holds your product.   You have a choice of three attractive designs: red, beige or white. If you buy 3 sample lifters in a set, you will also receive a practical cleaning brush. Each sample lifter is unique, decors may differ from the example pictures.

Variants from €29.75*
€89.25*
net: €75.00
Variants available
Wooden rack for storage of barrels 20-50 litres
Typ: 20 l Standard
Wooden rack for storage of barrels 20-50 litres.With our distillate barrels up to a content of 20 litres the barrel rack is included.     

€32.13*
net: €27.00
Variants available
Wooden tap
cm: 7 cm
Wooden tap for occasional tapping. For professional and permanent use, we offer a stainless steel tapImportant note – SpigotThe spigot has been designed for hobby use and incidental tapping. It shall consist of natural wood product with a cork gasket. Small leaks cannot be completely avoided and they are no cause for complaint. We offer the replacement of spigot in the shop. The spigot has to be watered at least 24 hours bevor use.We advise you to resign of spigot during aging and storage. There is a danger that the distillate leaks out of the drill hole. The sample may be taken from the bung hole.

€11.76*
net: €9.88

Bungs

Variants available
Bung for fermentation lock
Typ: Typ 1
Red Duplex-Bung for fermentation lock

€11.89*
net: €9.99
Bung slice made from poplar wood with a linen sheet
Bung slice was made from poplar wood with a linen sheet. It can be used for distillate and wine barrels with an approx. Ø 45mm bunghole. -  Please roll around the barrels in filled condition.

€5.36*
net: €4.50
Fermentation Bung brown
Silicone bungs F-19 brown fermentation. This fermentation bung is designed for barrels that have no space for the classic fermentation bung with tube.  Not much bigger and higher than a standard pint this fermented peat which is drilled and provided with an exhaust nipple allows the fermentation gases to escape. They have been tested and certified.  

€13.92*
net: €11.70
Variants available
Oak bung with jute cloth
cm: 40 x 30 x 23 mm
 Oak bung with jute cloth, for closing barrels.

€5.36*
net: €4.50
Silicon Bung with clamp
Silicon bung with integrated clamp to fix the Oenostick Systems in the barrel:

€15.35*
net: €12.90
Variants available
Silicone Bung
Typ: C0
They are food-safe, alcohol-resistant and very easy to clean in the dishwasher after use. Available in different conical sizes. They adapt to nearly every bunghole and create a vacuum after only a few days because of the microoxygenation in the barrel. 

€4.17*
net: €3.50
Silicone Bung C 16 with drill hole Ø 17 mm
The silicone bung is the modern form of the barrel bung.It is food-safe, alcohol-resistant and very easy to clean in the dishwasher after use.Hole Ø 17 mm for fermentation tubes with a shaft diameter of 20 mm (type 1 and type 2)

€11.78*
net: €9.90
Silicone Bung C 16 with drill hole Ø 8 mm
They are food-safe, alcohol-resistant and very easy to clean in the dishwasher after use.Available in different conical sizes. They adapt to nearly every bunghole and create a vacuum after only a few days because of the microoxygenation in the barrel. Drill hole Ø 17 mm for fermentation tubes with a shaft diameter of 20 mm (type 1 and type 2)

€11.78*
net: €9.90
Silicone Bung C 20 with drill hole Ø 17 mm
The silicone bung is the modern form of the barrel bung.It is food-safe, alcohol-resistant and very easy to clean in the dishwasher after use.Hole Ø 17 mm for fermentation tubes with a shaft diameter of 20 mm (type 1 and type 2)

€15.11*
net: €12.70
Silicone Bung C16 used
They are food-safe, alcohol-resistant and very easy to clean in the dishwasher before use.

€2.98*
net: €2.50
Silicone Bung Zeta
They are food-safe, alcohol-resistant and very easy to clean in the dishwasher after use. The Z50 in mushroom shape for an easy handling. They adapt to nearly every bunghole and create a vacuum after only a few days because of the microoxygenation in the barrel. 

€10.83*
net: €9.10
Wooden Bung for Vats
Wooden bung made of oak or acacia wood for vats

€23.80*
net: €20.00
Wooden bung with desulphurization basket
  Conical wooden bung with stainless steel eyelet in a set with a stainless steel basket attached to the rope, which allows the hanging of several sulphur cuts in the barrel.Article price does not include the sulphur cuts. You can buy these below accessories.  

€41.46*
net: €34.84
Wooden bung with sulphur wire
Conical wooden bung with stainless steel eyelet in a set with a stainless steel wire bent at the ends, which allows the sulphur cuts to be hung in the barrel. Article price does not include the sulphur cuts. You can buy these below accessories.    

€18.53*
net: €15.57

Laserbranding

Laserbranding
We laser your individual logo, lettering or name onto the front or belly of a barrel.    Requirements for the template:     PDF or JPEG     Black / white (no grayscale)      Please send the template to laser@wilhelm-eder.dePlease indicate in your email:     The desired position (belly or head)     Your order number Please note:     The branding will be adapted to the size of the barrel     Without consultation, the laser branding will always be placed in the center     Maximum size of the branding is approx. 300 x 300 mm     This article only counts for one laser branding, for several barrels the corresponding number must be ordered     Lasered articles are personalized and excluded from exchange / return Above you can see some sample images that make it possible to design and individualize your keg using a laser.By ordering the "Laser branding" item, you confirm that you are the owner of the logo file or that you have acquired the right to use it.

€23.68*
net: €19.90