To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

Tasting valve

€120.19*

net: €101.00

Prices incl. VAT plus shipping costs

Available, delivery time: 4 - 8 business days (for deliveries in germany)

Typ

Valve three edged wedge - 18 cm

Valve three edged wedge - 37 cm

Valve with wheel - 18 cm

Valve with wheel - 38 cm

Product number: 1900

Product information "Tasting valve"

Please select the required variant from the selection bar above.

Sampling valve for large casks. Pre-installed with internal lock nut and external large washer.

Triangular tasting valve for wooden barrel
Screw connection - R; V2A
3/8” screw connection for base with a thickness of 65 mm 12 x 1.5 x 200 mm

Handwheel tasting valve for wooden barrel
Screw connection - R; V2A
3/8” screw connection for base with a thickness of 65 mm 12 x 1.5 x 200 mm

Triangular tasting valve wooden barrel

screw connection V2A; ½”

Screw connection for base thickness 65 mm

Handwheel sampling valve wooden barrel

screw connection V2A; ½”

Screw connection for base thickness 65 mm

Accessories for casks & vats

Triangular cut key

Triangular cut key

Accessories for the triangular cut valve.

€10.71*

net: €9.00

Tube holding

To fix the tube on the side of the rack or at the floor. Made of stainless steel V4A.

€49.98*

net: €42.00

Yeast stirring spoon

Yeast stirring spoon

Yeast stirring spoon from V4A high-grade steel, suitable for 225/228 l to 300 l of barrels for stirring up of the yeast.

€76.16*

net: €64.00

Variants available

Gasket for stainless door

Gasket for stainless door

Typ: Typ 2

Replacement gasket for manhole door made of stainless steel.

€82.11*

net: €69.00

Variants available

Barrel screw for wooden barrel door

Barrel screw for wooden barrel door

cm: 120 mm

Barrel screw 120 mm, 160 mm, 180 mm or 220 mm made of stainless steel for a wooden barrel door. The screw fixes the door at the barrel. Suitable for barrels up to a volume of approx. 450 l. V4A with a MS-hat-screw nut.

€83.18*

net: €69.90

Thermometer

The thermometer is made of V4A stainless steel and has been filled with glycerin. It is for the usage in mash tanks in combination with the heat changing plates.

€89.25*

net: €75.00

Bunghole flap for stainless steel barrel door

Bunghole flap for stainless steel barrel door

Typ: 70 mm

The bunghole flap is made of stainless steel (V4A) and is installed in the stainless steel barrel door. The flap is inside of the barrel and thanks to the pressure of the wine it is tight. Only if a pipe is inserted you can empty the vat.

€89.25*

net: €75.00

Variants available

Ladder support bow

Ladder support bow

cm: Ladder support bow - Plate 5 cm

The ladder support bow (V4A) gets fixed on the barrel with screws. After that you can lean the ladder on it and fasten it on the support. A safe climb without any help is guaranteed. Included are 4 screws.

€90.44*

net: €76.00

Diving shell

The diving shell is inserted in the wooden vat and is used as a connection for the thermometer.

€120.19*

net: €101.00

Variants available

Tasting valve

Typ: Valve three edged wedge - 18 cm

Please select the required variant from the selection bar above.Sampling valve for large casks. Pre-installed with internal lock nut and external large washer.

€120.19*

net: €101.00

Stainless steel bunghole bush

Stainless steel bunghole bush

Stainless steel bunghole bush for screwing into the bunghole, ensures absolute hygiene when filling in and out and impresses with its high-quality appearance.

€128.52*

net: €108.00

Bunghole filler and de-airing plug

Bunghole filler and de-airing plug

V4A, external thread DN50 conical to screw it in the barrel, inside smooth for silicon bungs or fermentation locks.

€157.68*

net: €132.50

Glass tube for filling level valve for large casks

Glass tube for filling level valve for large casks

The borosilicate glass level indicator tube offers a reliable solution for precise level measurements.With a diameter of 13 mm and easy installation on the level indicator valve on the large drum, it is versatile.Its chemical resistance and temperature tolerance make it ideal for demanding environments.Price per running meter

€164.22*

net: €138.00

Variants available

Bunghole flap for wooden door

Bunghole flap for wooden door

mm: 100 mm

The bunghole flap is made of stainless steel (V4A) and is installed in the wooden door of the barrel. The flap is inside of the barrel and thanks to the pressure of the wine it is tight. Only if a pipe is inserted you can empty the vat. Available in:100 mm120 mm

€177.31*

net: €149.00

Discharge valve

Discharge valve

Discharge valve made of stainless steel V4AThe screw connection will be installed and secured with a lock nut at the lowest position on the bottom of the cask. The total discharge drainage will be installed on this connection

€180.88*

net: €152.00

Calotte foot

Calotte foot made of polished stainless steel V2A, the professional shelter for your barrel storage. The square plate is firmly screwed to the underside of the drum bearing. The threaded bolt is firmly fixed on the upper side in the nut welded to the plate. The counter nut located further below allows exact adjustment to the desired height. The bolt is placed on the bottom of the base in the matching recess of the round plate. By the individual adjustment of the four calotte feet it is possible to compensate an angle of up to 14 degrees and guarantees the horizontal storage of your large barrels, independent of unevenness on the floor. The floor storage systems do not stand on damp ground, so that the greatest possible hygiene is guaranteed. The calotte feet are also used for the storage of stainless steel tanks. Required are 4 pieces per cask storage

€203.49*

net: €171.00

Variants available

Disc valve

Typ: DN40

The disc valve is made of stainless steel V4A and is available in DN40 and DN50. A cap and a chain made of V4A is inclusive. Please select correct version in pick list.

€216.58*

net: €182.00

Fill level indicator valve

Fill level indicator valve

Stand glass valve for pipe 13/10 - wooden barrel version3/8" screw connection for stave wall up to 65 mmV4A - Valve V2AEquipped with a stand glass emptying valve (automatic) and a glas tube (approx. 10 cm long)A longer tube can be ordered under accessories.

€255.85*

net: €215.00

Mash querl of stainless steel

Mash querl of stainless steel

Designed for punching down the mash cake and for the stiring-up of the mash, entirely manufactured of stainless steel.

€290.36*

net: €244.00

Variants available

Tip

Discharge drainage

Discharge drainage

Typ: 600-1300 l

Drainage with tube outlet N40/V4a. The discharge drainage can be installed on the side or in the middle of the vat to the front. It is connected through the filler cap. Available for:600 l - 1.300 l1.300 l - 2.500 l3.000 l - 5.000 l6.000 l - 7.000 l8.000 l - 9.000 l

€304.64*

net: €256.00

Installation of stainless steel door

Installation of stainless steel door

We install the door in your new vat. For the installation into an old vat we charge according to effort by our coopers. If you have any questions please feel free to write us an email.

€321.30*

net: €270.00

Refilling can

The stainless steel jug is made of polished stainless steel V4A with a capacity of approx. 5 litres.It is equipped with a 72 cm long beak to facilitate refilling, even when the barrels are stacked on top of each other.

€374.85*

net: €315.00

Dome lid 220 mm - stainless steel

Dome lid 220 mm - stainless steel

Round dome lid stainless steel V4A specially shaped for oval and round wooden barrels.The dome lid is attached instead of the bunghole to enable e.g. easier filling and emptying of a rotary fermenter.Diameter approx. 220 mmAISI 316 qualityThe dome lid with 220 mm clear width is not only used in rotary fermenters, but in modern vinification also in large barrels in which white wine is fermented. By using the dome lid instead of the bunghole, the entry of the grapes into the wooden barrel is simplified!If you purchase a large barrel or rotary fermenter at the same time, we will be happy to install the dome lid directly for you.

€628.32*

net: €528.00

Mash sieve made of 3d printed PLA

Mash sieve made of 3d printed PLA

Mash strainer made from 3D printed plastic.The mash strainer is installed inside the fermentation vat, above the residual or clear drain.The mash strainer is made of PLA (polylactide), an environmentally friendly bioplastic. This is not only valued in medical technology for its safety and hygiene, but also sets new standards in terms of sustainability in the brewing and winemaking trades. The use of additive manufacturing technology not only ensures precise production, but also enables environmentally friendly production. This innovative approach minimizes waste and reduces the ecological footprint of the entire production process.Each mash sieve is a custom-made product, perfectly tailored to individual requirements and not only presents itself as a functional tool, but also impresses with its modern product design. The sophisticated design ensures even distribution of the mash to achieve optimum results.Another highlight of this mash sieve is its ecological degradability. After many years of use, the strainer can be disposed of in an environmentally friendly way without leaving any harmful residue.The material thickness not only ensures stability, but also a long service life. This robust construction ensures that the sieve can easily withstand the demands placed on it.

€704.48*

net: €592.00