Wooden storage for large vats

Product information "Wooden storage for large vats "

The wooden storage for large vats is made of air-dried Douglas fir or oak wood.

The wood comes from our own cutting. The bearings are planed and double coated with food-safe clear varnish. The individual elements of the barrel storage are fixed with stainless steel screws. The feet of the storage are underlaid with solid core plates. The spherical feet shown in the picture can be ordered as an option under Accessories.


Please note that the dimensions of these barrel storage systems are adapted to the large barrel and therefore vary.

Dimensions for vats up to 1200 l ca.:
Width: 130 cm
Height: 48 cm
Depth: 184 cm

Characteristics from "Wooden storage for large vats "
Material: Wood
New / used: New
Suitable for: > 1200 l barrels

Suitable for:

Calotte foot
Calotte foot made of polished stainless steel V2A, the professional shelter for your barrel storage. The square plate is firmly screwed to the underside of the drum bearing. The threaded bolt is firmly fixed on the upper side in the nut welded to the plate. The counter nut located further below allows exact adjustment to the desired height. The bolt is placed on the bottom of the base in the matching recess of the round plate. By the individual adjustment of the four calotte feet it is possible to compensate an angle of up to 14 degrees and guarantees the horizontal storage of your large barrels, independent of unevenness on the floor. The floor storage systems do not stand on damp ground, so that the greatest possible hygiene is guaranteed. The calotte feet are also used for the storage of stainless steel tanks.  Required are 4 pieces per cask storage

€203.49*
net: €171.00